DYNACRETE® for Municipalities

(888) 436-9663

Animal Control Facilities

DynaCrete® PIM+

Waterproofing-

DynaCrete® PIM+ creates an aero-gel barrier within the cell structure of any cementitious material. This barrier creates a waterproof seal, preventing moisture from migrating through the concrete, whether groundwater, or rainwater. Sewer, Water, Street, Parks, and Irrigation departments will see benefits ranging from reduced waste, longer lifespan of infrastructure, and lower maintenance costs.

PIM+ will stop water from the positive or negative side- PERMANENTLY!

DustProofing / Abrasion Resistance-

DynaCrete® PIM+ has been proven to reduce wear due to abrasion by over 50%! This results in a significantly longer lifespan of refuse transfer stations, roadbeds, bridgedecks, etc., In warehouse applications, employee health, lifespan of sensitive electronics, and machinery are extremely important issues. By reducing wear, traffic from people and machinery will produce less highly damaging silica dust from the concrete, keeping employees healthier, and increasing lifespan of costly equipment!

ASR (Alkali Silicate Reaction) Damage.

DynaCrete® PIM+ has been shown to prevent and even stop ASR and the damage it causes. By neutralizing the alkali within the concrete, and stopping water transmission, two of the major elements of ASR have been eliminated. In the event of highly damaged concrete from a previous ASR problem, PIM+ has been proven to stabilize the sub layer of concrete, allowing replacement of just the rebar cap, or wear surface.

Bridge Construction

Dynacrete® PIM+ has numerous applications in bridge construction. By eliminating the moisture transmission through the concrete, bridges over water will not wick water to the surface causing icing problems. Freeze / thaw damage, ASR, as well as salt attack are eliminated as well. DynaCrete® PIM+ has been proven to increase tensile and flexural strength allowing for a longer lasting structure, while reducing placement costs.

Sidewalks

By treating sidewalks, parking lots, stairways, etc, with DynaCrete® PIM+, removal of ice and snow costs are greatly reduced. By permanently sealing the cell structure of the concrete, water cannot penetrate. Therefore, when that water freezes, the resulting ice crystal cannot bond into the concrete. Ice and snow easily sluff away, resulting in lower numbers of man hours, as well as a reduction in the use of de-icing chemicals. The concrete is also protected from the damaging effects of those chemicals and salts.

Marine

Floats, docks, ramps, warehouses, etc, can all benefit from DynaCrete® PIM+. PIM+ is used to increase strength of floats and docks, without making them unnecessarily brittle, as happens with a typical high performance design mix. The waterproofing and strengths added with the PIM+ of course, simply makes components, ramps, sidewalks, etc last longer.

Landscaping

DynaCrete PIM+ used as an admixture for extruded concrete curbing will greatly increase it's strength, enabling the curbing to resist damage from vehicles, mowers and other maintenance equipment, skateboards, bicycles, etc. Treat topically as well to waterproof and eliminate damage caused by freeze / thaw cycles.

DynaCrete® PTS+

Stain Resistance

PTS+ from DynaCrete® produces a highly stain resistant surface on virtually any substrate. It is widely used and recommended as a treatment for concrete, stone, brick and paver driveways. Oil stains, tire marks, etc. are not allowed to penetrate, making them much easier to remove.

Acid Resistance

DynaCrete® PTS+ is widely used in agricultural and manufacturing facilities to prevent damage to concrete surfaces caused by the use of highly caustic cleaning materials, as well as reduce cleaning expense by sealing porous surfaces. Odors, oils, and contaminants are not allowed to penetrate, making cleanup easier and less costly.

Safety

DynaCrete® PTS+ has been proven to not change the Coefficient of Friction. That is, simply, it does not make surfaces slick. This is VERY valuable in wet environments. In fact, safety is further improved due to surfaces simply drying more quickly, as water has not been allowed to saturate the surface. PTS+ also allows snow and ice to be removed more easily because the crystal has not been allowed to "bite" into the surface. This of course reduces maintenance costs, but more importantly, increases safety, therefore reducing liability.

Graffiti Removal

A very hot topic for municipalities! PTS+ can greatly reduce costs of removal. You'll never stop it from happening, but you can make it easier to get rid of! DynaCrete® PTS+ seals the surface so tightly" that paint, wax, gum, etc. can't get a grip. While these materials will still "dry" on the surface, the "bond" is greatly reduced allowing for easier removal. PTS+ works equally well on-

Concrete- bridges, underpasses, skateboard parks, public restrooms, picnic tables, etc.

Stone- sculpture, public art, monument signing, etc.

Brick- buildings, fountains, walkways, etc.

Animal Control Facilities-

DynaCrete® PTS+ is widely used in animal facilities. By treating any porous surfaces with PTS+, waste is much more easily cleaned. Odors, stains, bacteria, etc. are not allowed to penetrate the surface. This greatly helps control odor, and disease as well as protecting the surface from the acids and caustic components of urine and cleaning fluids.

Parks & Recreation-

DynaCrete® PTS+ has MANY uses to make your life easier! Reduce costs by promoting easier cleaning. Today, concrete and stone are used in the construction of picnic areas, public restrooms, fountains and water features, skateboard parks, playgrounds, etc. Use PTS+ to make general cleaning easier. PTS+ will reduce odor in restroom areas and picnic areas, prevent algae and mineral buildup in pools and fountains, and ease removal of graffiti in skateboard parks and playgrounds.

Landscaping

Prevent costly replacement of curbing, pavers, sculpture, planters, etc. PTS+ makes an excellent waterproofer for porous surfaces such as terra cotta, clay, mortar, stone, and concrete. Reduce or eliminate damage caused by freeze / thaw cycles, airborne contaminants like salt and pollution, as well as improving stain resistance.

DynaWood

Landscaping

DynaWood is used extensively for the treatment of timbers used in garden beds, fences and outdoor structures. DynaWood can replace highly toxic chemicals used to treat subterranean lumber like chromium, arsenic, penta, and creosote.

Painting

Wood treated with DynaWood becomes a much more stable substrate to apply paint and other coatings to. The wood becomes nearly petrified, preventing moisture and tannins from migrating through the wood, allowing paint to adhere more uniformly,. This has proven to allow coatings to last up to 300% longer.

Marine

While wood permanently submerged in water has been shown to last nearly forever,

the wet-dry, wet-dry cycles of marine environments are extremely damaging. By treating pilings, decking, dock frames, gangplanks, etc. with DynaWood, life of these components are greatly increased. DynaWood is totally non-toxic, and ecologically friendly, making it a perfect choice for sensitive marine environments.

DynaCrete® PC

Every Day Use

DynaCrete® PC is a valuable timesaver for all cleaning tasks. Industrial strength PC will remove oil stains, tire marks, adhesive stains, etc, from shop and warehouse floors. Remove algae and mineral deposits from fountains and pools. Remove efflorescence from brick. Use in place of harsh acetic washes. DynaCrete® PC removes the stain, not the surface!

Painting

Use DynaCrete® PC before coating floors, patios, walls, etc. PC will remove the contaminants that lead to failed coatings.