Stain Resistance

Pet Areas

Decorative / Architectural

Safety

Landscaping

Landscaping

Painting

Marine

DynaCrete® PIM+

Waterproofing-

DynaCrete®  PIM+ creates an aero-gel barrier within the cell structure of any cementitious material.  This barrier creates a waterproof seal, preventing moisture from migrating through the concrete, whether groundwater, or rainwater.  Treat interior or exterior walls and floors of foundations and basements.  Treat basement floors, and slab-on-grade floors to stop ground water from causing damage.  PIM+ will stop water from the positive or negative side- PERMENANTLY! 

FloorCoverings / Painting

PIM+ can be a tremendous benefit to both contractors as well as howeowners / property managers.  PIM+ can allow contractors to install flooring after only 14 days as opposed to the typical 30 days, greatly reducing expense by streamlining projects.   Prevent failure of floorcoverings from water and contaminants trapped beneath them.  Water, alkali, salts, calcium carbonates, and other contaminants are eliminated, instead of causing delaminations, rot, discoloring, etc. to your flooring.  When painting, PIM+ will stabalize and waterproof all concrete.  PIM+ makes the concrete surface more uniform, allowing it to take coatings more readily.  By eliminating the moisture, and contaminants within the concrete, coatings have been proven to last up to 300% longer!

ShotCrete

DynaCrete®  PIM+ has been proven to waterproof, and densify all concrete.  As ShotCrete has so many applications in the water feature, pool, soil stabilization, and restoration fields,  PIM+ is a "natural" due to it's ability to waterproof, acid proof, and strengthen concrete.    PIM+ has also been proven to be a valuable admixture, aiding in pump flow and lifespan, set time, and concrete quality.

Flatwork

PIM+ used as a curing agent for flatwork can significantly reduce or even eliminate cracking, crazing, checking, and spalling.  Prevent call-backs!  By using PIM+ to replace the moisture in brand new concrete with aero-gel, hydration is slowed resulting in greatly reduced shrinkage.  Less shrinkage= less cracking.  PIM+ causes the concrete to cure more uniformly as it displaces the moisture at an even rate across the entire slab. This also greatly reduces costs by eliminating steps.  "Cure", seal, and preserve, all in one step.

Decorative / Architectural

PIM+ from DynaCrete is widely used to stabilize and waterproof concrete substrates prior to installation of decorative overlayments and stamp work.  Treat concrete and block retaining walls to aid in waterproofing, but also increase the lifespan of stone and brick veneers.

This allows the veneers and overlayments to last up to 300% longer because water, and contaminants are not working to reject the new layer.  PIM+ will also seal and treat "real" stucco, providing a more weather-tight home.

Landscaping

PIM+ should be used an admix for extruded curbing to increase strength, enabling curbing to resist damage from vehicles, maintenance equipment, etc.  Treat topically as well to eliminate freeze / thaw damage.

DynaCrete® PTS+

Stain Resistance

PTS+ from DynaCrete®  produces a highly stain resistant surface on virtually any substrate.  It is widely used and recommended as a treatment for concrete, stone, brick and paver driveways.  Oil stains, tire marks, etc. are not allowed to penetrate, making them much easier to remove.

Pet Areas

DynaCrete®  PTS+ is widely used in dog kennels, horse barns, etc,  to prevent damage to concrete surfaces caused by the use of highly caustic cleaning materials, as well as reduce cleaning time by sealing porous surfaces.  Odors, oils, and contaminants are not allowed to penetrate, making cleanup easier and less costly.

Architectural

PTS+ is used as a waterproofer and wear coat over many architectural coatings and applications such as acid stained concrete,  stucco,  stone,  brick, and masonry.  It leaves behind no gloss, so it can provide valuable protection in applications where no other sealer type can be used.

Safety

DynaCrete®  PTS+ has been proven to not change the Coefficient of Friction.  That is, simply, it does not make surfaces slick.  This is VERY valuable in wet environments.  In fact, safety is further improved due to surfaces simply drying more quickly, as water has not been allowed to saturate the surface.   PTS+ also allows snow and ice to be removed more easily because the crystal has not been allowed to "bite" into the surface.  This of course reduces maintenance costs, but more importantly, increases safety, reducing liability.

Landscaping

Prevent costly replacement of curbing, pavers, sculpture, planters, etc.  PTS+ makes an excellent waterproofer for porous surfaces such as terra cotta, clay, mortar, stone, and concrete.  Reduce or eliminate damage caused by freeze / thaw cycles, airborn contaminants like salt and pollution, as well as improving stain resistance.

DynaWood

Construction-

DynaWood can be used to treat any type of natural wood.  Treat joists and subfloors over crawl space construction to keep moisture from attacking the wood fibers, and inhibit mold growth.  Treat lumber that contacts concrete (Make sure to PIM+ the concrete too) to prevent moisture transfer through the wood.  Treat outdoor structures like  decks, arbors, and gazebos with DynaWood and avoid the use of toxic chemicals in traditionally available treated lumber.

Landscaping

DynaWood is used extensively for the treatment of timbers used in garden beds, play structures, fences and outdoor structures.   DynaWood can replace highly toxic chemicals used to treat  subterranean lumber like chromium, arsenic, penta, and creosote.

Painting

Wood treated with DynaWood becomes a much more stable substrate to apply paint and other coatings to.  The wood becomes nearly petrified, preventing moisture and tannins from  migrating through the wood, allowing paint to adhere more uniformly,.  This has proven to allow coatings to last up to 300% longer.

Marine

While wood permanently submerged in water has been shown to last nearly forever,

the wet-dry, wet-dry cycles of marine environments are extremely damaging.  By treating pilings, decking, dock frames, gangplanks, etc. with DynaWood, life of these components are greatly increased.  DynaWood is totally non-toxic, and ecologically friendly, making it a perfect choice for sensitive marine environments.

DynaCrete® PC

Every Day Use

PC makes an excellent cleaner for every around the home job.  Use PC to clean and maintain dog kennels, patios, decks, etc.

Garages & Driveways

DynaCrete® PC is used to remove oil stains, tire marks, etc, from sidewalks, driveways, garages and patios.  Remove efflorescence from new brick construction in place of harsh acetic washes. 

Painting

Use DynaCrete®  PC before coating floors, patios, walls, etc.  PC will remove the contaminants that lead to failed coatings.